径向抓持器-抓持器-吉玛泰克自动化工程(查看)

夹具订制

agg可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具agg...b 安装在eoat上，钢管 agg...c 安装在模具上。

一旦机械手向模具靠近，平行电动抓持器，夹具在压力的作用下逐步向钢管靠近，

并与之接触。

agg21-b 和 agg30-b 采用的是双动作安全弹簧，---在压缩空

气 (nc)缺失时设备的正常运行。

agg19-b 采用的是单动作复位弹簧(no)。

gripper for engagement

the agg is used to provide a precise ccting between the robot

and the mould.

this necessary when metal inserts must be p1aced in the

mould， before the p1astic injection.

the gripper agg…-b is fitted on the eoat， while the steel bushing

agg…-c is fitted on the mould.

once the robot has approached the mould，抓持器， the gripper is

pressurized， thus it closes&engages the bushing.

agg21-b&agg30-b are double-acting with a safety spring to

keep the gripper engaged even without compressed air (nc).

agg19-b is single-acting with reset spring (no).